Beauty brands "snag up" pulp-molded packaging? Unpacking the "middlemen" in this sector-2
Release time：2026-05-21
Meishi Machinery: Why does it get stuck in the "throat" of pulp molding?
In the field of pulp molding equipment, Meishi Machinery has a very clear technological path - not to make "general-purpose machines", only to make "beauty grade" products.
Several key technical indicators can provide a glimpse:
Accuracy: Wall thickness tolerance ± 0.1mm
The requirements for surface quality in beauty packaging are almost "abnormal" - there should be no molding lines, no bubble marks, and no color difference. Meishi Machinery uses a multi zone independent vacuum control system and CFD fluid simulation mold design to control the wall thickness tolerance within ± 0.1mm, with an industry average of ± 0.3mm.
Speed: Single mode beat 18-25 seconds
By using a servo driven hot pressing system and a fast demolding mechanism, Meishi's high-speed models can achieve a single-mode cycle time of 18 seconds, which is directly doubled compared to the industry's common 30-40 seconds. For beauty customers with an annual procurement volume of millions, this means that the equipment investment return cycle has been shortened from 18 months to 9 months.
Alien ability: The aspect ratio can reach 4:1
The pulp molding process achieves complex three-dimensional structure customization through molds, and has good formability within the range of width to depth ratio ≤ 3:1. If dry pressing technology is used in conjunction with annealing treatment, a local aspect ratio of 4:1 can be achieved, but the rebound rate needs to be controlled (about 4.5%)
Slurry adaptation: compatible with 100% recycled slurry
Under the pressure of environmental compliance, Meishi's equipment has achieved stable molding of 100% recycled pulp, with a surface whiteness of ≥ 85% ISO and strength that meets ISTA 3A transportation testing - this means that customers can use the cheapest waste cardboard boxes as raw materials to create a high-end texture that looks like virgin pulp.
Whole line plan: from laboratory to mass production, delivery in 45 days
What Meishi provides is not just a machine, but a turnkey project of "formula debugging → mold development → sample verification → production line implementation". For beauty brands, it usually takes only 45 days from concept to mass production, which is half the industry average.
[Return]
